can i use a 90-93 driver side axle on my 1st gen b16a with the b16a intermediate shaft? i have the b16a axles but the one is bad and i'm just looking to replace it. thanks.

 

http://www.hasport.com/News/Articles...rt%20Axles.htm - you should be able to tell from this which axle you need

 

thanks

 

I just put a jdm b16a into my 95 civic with 94 gsr axles and it seems that the driver side is like an inch too short. The boot looks stretched and when I put the car in the air the transmission side of the axle (on the intermediate shaft) was actually coming out. Did I get the wrong axle? Thanks

 

i did the same swap in my 1997 civic you can use the delsol vtec to i think there the same as the gsr axles i should work with the swapmine did i hope this helped

 

Does anyone know where to get B16a axles cheap??? Can't afford much, but UV joint busted on me last night


THANKS!