VAFC hooked up to PM6 wire harness? HELP!!!
Thread Starter
RacinMasonC
Joined: Jan 2003
Posts: 1,166
Likes: 0
From: Minnesota
VAFC hooked up to PM6 wire harness? HELP!!!
Hey wheres a HOW TO on the VAFC hooked up to the PM6 wire harness? with d16a6 distributor and stock ecu (PM6)??? i know you can easily do this but i don't know where to start searching, is there any place on this site? thanks!
Thread Starter
RacinMasonC
Joined: Jan 2003
Posts: 1,166
Likes: 0
From: Minnesota
Originally posted by drift
D16A6 is a non-VTEC motor, therefore the VAFC is not fully compatible, and not recommended for use by Apex'i. this is why you cannot find a diagram for install.
try an SAFC.
D16A6 is a non-VTEC motor, therefore the VAFC is not fully compatible, and not recommended for use by Apex'i. this is why you cannot find a diagram for install.
try an SAFC.
Thread Starter
RacinMasonC
Joined: Jan 2003
Posts: 1,166
Likes: 0
From: Minnesota
stock Si wire harness
would i just tap into the ecu wires? i just need to know what wires from the VAFC goes to what wire on the ECU cuz i got a Helms Manual that should tell me the wires from my ecu, i would think so. but i just need to know what color wire from the VAFC goes to where on the ecu?
IE: white wire from VAFC goes to TPS wire on ecu.
would i just tap into the ecu wires? i just need to know what wires from the VAFC goes to what wire on the ECU cuz i got a Helms Manual that should tell me the wires from my ecu, i would think so. but i just need to know what color wire from the VAFC goes to where on the ecu?
IE: white wire from VAFC goes to TPS wire on ecu.
Flaccid Member
Joined: Jul 2002
Posts: 571
Likes: 0
From: Seattle
Originally posted by ZiviCase10287
stock Si wire harness
would i just tap into the ecu wires? i just need to know what wires from the VAFC goes to what wire on the ECU cuz i got a Helms Manual that should tell me the wires from my ecu, i would think so. but i just need to know what color wire from the VAFC goes to where on the ecu?
IE: white wire from VAFC goes to TPS wire on ecu.
stock Si wire harness
would i just tap into the ecu wires? i just need to know what wires from the VAFC goes to what wire on the ECU cuz i got a Helms Manual that should tell me the wires from my ecu, i would think so. but i just need to know what color wire from the VAFC goes to where on the ecu?
IE: white wire from VAFC goes to TPS wire on ecu.
go to www.apexi-usa.com and download the instruction manual. it has the wiring diagram for the wires coming off the unit.
