Im basically done with my swap, i put the JDM D15b into my 95 CX, i got every thing done, and i go to start the car and theres nothin, the engine shakes and u can hear the starter but it just doesnt spark, distrib. wires look fine and so do the spark plugs but im gonna go ahead and get new ones, is there any thing else i should look at?? ne thing would help!

 

check all of your engine grounds. I swapped a ground that should have been on the coolant temp sensor housing, with a spare one on the starter, and my car cranked once (sucked all the stray electrons out of that part of the ground) and then died.

-PHiZ