High-Flow Fuel Filter other than AEM?
のんびり～(´ε｀)
Joined: Sep 2000
Posts: 2,314
Likes: 1
From: San Jo, Cali
Are you looking for a stock replacement one? There are plenty of high-flow inline filters available, but I think the AEM one is the only one designed to fit in the stock location. If you're redoing your entire fuel system, Aeromotive makes nice products, including inline pumps and filters.
Thread Starter
Member
Joined: Jun 2002
Posts: 73
Likes: 0
Well I'm running 1/2" aluminum fuel line and replacing the fuel tank with a fuel cell, and I need more flow than what the AEM filter can offer. I've looked at inline filters on ebay but most of them (even the ones that filter down to 10 microns) say that they are not reccomended for use on injected motors.
Moderator
Joined: Jun 2001
Posts: 11,776
Likes: 0
Canton Racing.
http://www.cantonracing.com/
Beware the canister fuel system... it uses -12 fittings. You could drive a mack truck down the hose.
You'll probably want to get one of their inline filters with convenient threads and use adapters to get it to something nice. I just redid my fuel system to use all -6.
http://www.cantonracing.com/
Beware the canister fuel system... it uses -12 fittings. You could drive a mack truck down the hose.
You'll probably want to get one of their inline filters with convenient threads and use adapters to get it to something nice. I just redid my fuel system to use all -6.
