How do you measure the size of the collector on a header?
Thread Starter
Some have it, some don't
Joined: Mar 2002
Posts: 312
Likes: 0
From: RavensTown, Maryland
How do you measure the size of the collector on a header?
I've tried a search and couldn't find an answer to my question. When measuring the size of the collector on a header, do you measure the outer diameter or inner diameter?
GWAKS- Tech Geekifier
Joined: Oct 2000
Posts: 2,109
Likes: 0
From: Hampton, VA
The measurement is typically the size of the pipe, which is measured by OD, unless specifically specifying the ID.
__________________
-Harry
AIM: NDcissive
CRX and Pre '92 Civic, Engine Tech and Tuning, & Track and Autocross Forum Mod
-Harry
AIM: NDcissive
CRX and Pre '92 Civic, Engine Tech and Tuning, & Track and Autocross Forum Mod
Senior Member
Joined: Aug 2002
Posts: 259
Likes: 0
From: USAF
It's pi times the length of the runner off cylinder number 3, divided by 2.
LMAO How thick is your pipe there homeboy? u got 1/2" thick steel header or what? It shouldn't be thick enough to where when u measure a 2.25" pipe ID it's not gonna be 3.25" OD.
LMAO How thick is your pipe there homeboy? u got 1/2" thick steel header or what? It shouldn't be thick enough to where when u measure a 2.25" pipe ID it's not gonna be 3.25" OD.
Thread Starter
Some have it, some don't
Joined: Mar 2002
Posts: 312
Likes: 0
From: RavensTown, Maryland
Originally posted by aut0tek
It's pi times the length of the runner off cylinder number 3, divided by 2.
LMAO How thick is your pipe there homeboy? u got 1/2" thick steel header or what? It shouldn't be thick enough to where when u measure a 2.25" pipe ID it's not gonna be 3.25" OD.
It's pi times the length of the runner off cylinder number 3, divided by 2.
LMAO How thick is your pipe there homeboy? u got 1/2" thick steel header or what? It shouldn't be thick enough to where when u measure a 2.25" pipe ID it's not gonna be 3.25" OD.
