B20/VTEC work in the bay area
Thread Starter
Registered User
Joined: Mar 2003
Posts: 41
Likes: 0
From: Napa, CA, USA
B20/VTEC work in the bay area
I'm looking for a machine shop or a tuning shop that can:
Disassemble my B18c1 head
Reassemble it with new valve seals (provided by me)
Modify the head to fit on the b20 block
Install Crower rods and JE pistons (provided by me) onto a completely bare JDM B20b block
I've been calling in the general Napa area, but shops out here are like "What's a b20". Napa sucks. If anyone could help I'd love to get my car driving again.
-Tim
Disassemble my B18c1 head
Reassemble it with new valve seals (provided by me)
Modify the head to fit on the b20 block
Install Crower rods and JE pistons (provided by me) onto a completely bare JDM B20b block
I've been calling in the general Napa area, but shops out here are like "What's a b20". Napa sucks. If anyone could help I'd love to get my car driving again.
-Tim
のんびり～(´ε｀)
Joined: Sep 2000
Posts: 2,314
Likes: 1
From: San Jo, Cali
If BRE was still around, I'd would tell you to go there. You might want to try Group A(Skunk) in Hayward, although I'm not sure if they're still open since I heard they were moving their operations down south. There's also several shops in Sac, have you calleda round up there?
