Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

HELP! Need ECU Codes for PR3.

Thread Tools
 
Old Apr 14, 2003 | 06:33 PM
  #1  
Darknight9's Avatar
Darknight9
Thread Starter
Junior Member
 
Joined: May 2002
Posts: 11
Likes: 0
From: Ft. Wayne Indiana
Default HELP! Need ECU Codes for PR3.

Hey everyone

Im working on my 89 CRX equipped with a JDM B16A swap with the PR3 ecu. My car seems to idle and run ok but the vtec is inoperative. The check engine light has been on before but never affected the operation of the Vtec itself. Checked the malfunction indcator light on top of the ecu and it flashes this sequence

6 quick flashes - - - - - - then two long flashes ___ ___ then three short flashes - - - then it cycles back to the 6 short flashes again.

First question, is this code 6 and then code 3? If so, what does this identify as the issue? If it is not the above mentioned codes then what the heck are they? Any help that you can provide is much appreciated.

Thanks,

DK9
Reply
Old Apr 14, 2003 | 09:03 PM
  #2  
inspyral's Avatar
inspyral
のんびり~(´ε`)
 
Joined: Sep 2000
Posts: 2,314
Likes: 1
From: San Jo, Cali
Default

Looks like a 6 and a 23 to me.

6 Accord Civic CRV CRX Del Sol Odyssey Prelude
85-98 86-98 97-98 85-91 93-97 95-98 85-98
ECT Sensor (Engine Coolant Temperature)
defective circuit or unplugged / defective sensor

23 Accord Civic CRV CRX Del Sol Odyssey Prelude
98 * 96-98 n/a n/a 94-97 n/a 92-98
KS (Knock Sensor)
defective circuit or unplugged / defective sensor
* not a valid code if V-6 engine
Reply




All times are GMT -8. The time now is 07:15 AM.