Out of ca$h. Is 1.75 inch exhaust okay for h22a1?
03-17-2003, 07:46 PM
#1
RIP H22A-CB7 :(
Thread Starter
Join Date: Mar 2002
Location: Canada
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Out of ca$h. Is 1.75 inch exhaust okay for h22a1?
Hey. As the topic stated, is a 1.75 inch exhaust system going to seriously hinder my h22a1 until I get enough to do it right?
What kind of performance loss ought I expect?
What kind of performance loss ought I expect?
03-18-2003, 12:57 AM
#2
Flaccid Member
Join Date: Jul 2002
Location: Seattle
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
too small. you'll lose topend performance in the way of engine stutter and possible refusal to rev all the way to redline.
you'll get amazing low-end response tho... but after 4000rpm, you'll start choking the motor.
expect to lose 10-20hp
but it wont hurt your motor as long as you dont flog it. just be careful of detonation due to exhaust gas reversion from backpressure. i wouldnt rev her past 5000rpm if it were me.
you'll get amazing low-end response tho... but after 4000rpm, you'll start choking the motor.
expect to lose 10-20hp
but it wont hurt your motor as long as you dont flog it. just be careful of detonation due to exhaust gas reversion from backpressure. i wouldnt rev her past 5000rpm if it were me.
h:
