Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

need help please

Old May 24, 2009 | 10:57 AM
  #1  
caveman's Avatar
caveman
Thread Starter
Junior Member
 
Joined: May 2009
Posts: 1
Likes: 0
From: los angeles
Default need help please

my friend h as a 97 acura cl and we changed out his ignition switch and the wires connecting to it but the car doesnt turn over... we had the problem before we changed it but at that time none of the lights for the cluster and the windows werent rolling up but since we canged it those things work but the car is still not turning over
Reply
Old Jun 21, 2009 | 11:54 AM
  #2  
onesweetcivic's Avatar
onesweetcivic
Member
 
Joined: Feb 2006
Posts: 40
Likes: 0
From: Indianapolis, IN
Default

check the antitheft system or try reprograming the transponder in the key look for solid green light with a key on it if its on then its the key
Reply



All times are GMT -8. The time now is 03:03 PM.