Driveshaft problem...
#1
Built B16a
Thread Starter
Join Date: Feb 2005
Location: liverpool, UK
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
Driveshaft problem...
Got a S9b LSD tranny, with some 96 spec itr shafts (non abs) and some B16a2 shafts, they came out of this box but i am struggling to get the left side back in, it is millimeters off going fully in and wont line up with the bearing bracket on the back of the block.
I have tried both the same shafts in another s9b box and they go straight in no problems, cant see anything out of line in the box either, any ideas?
I have tried both the same shafts in another s9b box and they go straight in no problems, cant see anything out of line in the box either, any ideas?