what turbo kits are available for a eg w/ a b series swap?

 

They don't make turbo kits for swapped cars, you just use the kit that goes with the motor you have. You may have to modify intake piping or the downpipe.

 

Drag and RevHard.

 

^They make kits with the piping to match your car.

Or, you can just get any B series kit and adapt the piping. You have to be careful, though. If you have a GSR swap, it'll be hard to line up the upper charge pipe if you get B18B/B20/B16/B18C5 piping because of the location of the throttle body on the GSR manifold. The same thing goes for trying to use a GSR upper charge pipe on a B18B/B20/B16/B18C5.

 

Interesting, I didn't know they made piping kits.....learn something every day

 

how much will the piping be off...I am doing an ls (b18b) swap...will the piping be off alot or is a matter of trimming here and there?

 

It shouldn't be off by much. I know RevHard makes an "EG B-series" turbo kit. I'm not sure if it's a one size fits all type of deal or if they make one for the B18B, B18C, B16, B18C5, etc.

Check out this thread:

https://www.honda-acura.net/forums/s...threadid=26509

That's a pretty nice deal going on the RevHard kits.

 

It is pretty much a one size fits all deal, I guess rev-hard believes that not many people will keep a stock GSR manifold for boost anyways.