i put an AEM fuel rail on, and an AEM fuel reg. .........on my 2000 teg "GSR" now it doesn't want to start up right????? what do i need to do the fuel pres. is set to stock psi. i have the fuel press gauge hooked up too? b/c it will not start up at first it made the cel come on and its reading code 71 misfire in cyl. #1 how do i fix this anything will help me thanks everybody

 

Are you running the right orifice(h: ) in the AEM FPR? What's your fuel pressure reading with the rail pressurized? Are your injectors connected properly?

 

the car runs fine it will not start right i don't know what to do to it

 

 

i'm at stock psi's man its like at 38-43 something like that the injectors are hooked up right.......

 

Hold a screwdriver up to the injector for cyl#1 and put your ear against the handle. See if you can hear the injector clicking as it cycles.

 

ok i'll see what it does man