Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

how do i wire up this swap ?? 92 civic and 92-95 jdm b16

Old Nov 8, 2002 | 01:55 PM
  #1  
rudeboy's Avatar
rudeboy
Thread Starter
Junior Member
 
Joined: Jun 2002
Posts: 24
Likes: 0
Default how do i wire up this swap ?? 92 civic and 92-95 jdm b16

ok its a 92 civic hatch. putting in 92-95 jdm b16. I know that the 92 civic may have vtec wires already. Im not sure. Can anyone give me info on how to wire this swap up with vtec. He is going to be using the jdm obd1 b16 ecu. thanks
Reply
Old Nov 8, 2002 | 10:43 PM
  #2  
92b16vx's Avatar
92b16vx
Senior Member
 
Joined: Sep 2002
Posts: 162
Likes: 0
From: stationed in Europe
Default

go to hybrid-honda and check what wires you need to run to where unless you are working on a vx or si then i believe all you have to mess with is the o2 and the knock sensor.
Reply



All times are GMT -8. The time now is 11:25 AM.