Honda-Acura.net

Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

i bought my f22b1 AEM rail used with no bolts..what's the thead size of the FPR hole

 
Old Nov 8, 2002 | 01:37 PM
Share
  #1  
accordfreak's Avatar
accordfreak
Thread Starter
Senior Member
 
Joined: Mar 2002
Posts: 252
Likes: 0
From: bay area, ca
Default i bought my f22b1 AEM rail used with no bolts..what's the thead size of the FPR hole
i bought my f22b1 AEM rail used and it came with no fittings.. I'm going to use a aeromotive fpr.. so what's the size of the thread to plug up the AEM rail Fuel pressure regulator hole??

thanks!
Reply
0
Old Nov 8, 2002 | 06:21 PM
Share
  #2  
inspyral's Avatar
inspyral
のんびり～(´ε｀)
 
Joined: Sep 2000
Posts: 2,314
Likes: 1
From: San Jo, Cali
Default
Is it the same size as the hole you can thread a fuel pressure gauge into? If so, it should be 1/8 NPT, if not, I have no clue :dunno:
Reply
0
Old Nov 8, 2002 | 07:55 PM
Share
  #3  
accordfreak's Avatar
accordfreak
Thread Starter
Senior Member
 
Joined: Mar 2002
Posts: 252
Likes: 0
From: bay area, ca
Default
nah it's the fpr hole... the 1/8 hole for the gauge is already plugged. on the rail there's 2 small holes for the stock FPR to bolt on to and the center hole for the fuel to go through.. and there's threads in that hole.. thanks!
Reply
0
Old Nov 8, 2002 | 09:02 PM
Share
  #4  
inspyral's Avatar
inspyral
のんびり～(´ε｀)
 
Joined: Sep 2000
Posts: 2,314
Likes: 1
From: San Jo, Cali
Default
Is it larger than the 1/8 hole? 5/16 or 3/8 NPT maybe?
Reply
0
Back to Subforum
Engine Swaps, Tech & Tuning
View Next Unread
stupid ebay


Thread Tools

Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -8. The time now is 11:27 AM.