Honda-Acura.net

Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

Maximum rev limiter for valves/springs etc?

Thread Tools
 
Old Sep 8, 2007 | 01:39 PM
Share
  #1  
B16a2VTIguy's Avatar
B16a2VTIguy
Thread Starter
Built B16a
 
Joined: Feb 2005
Posts: 556
Likes: 0
From: liverpool, UK
Default Maximum rev limiter for valves/springs etc?
I have boosted b16a with itr valvesprings and retainers.
It is only running stock b16a2 cams.

Whats the maximum revs that i can go to safely?
Last edited by B16a2VTIguy; Sep 8, 2007 at 01:40 PM. Reason: spelling
Reply
0
Old Sep 8, 2007 | 02:05 PM
Share
  #2  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default
8200-8500

if power is being made that high
Reply
0
Old Sep 8, 2007 | 02:38 PM
Share
  #3  
B16a2VTIguy's Avatar
B16a2VTIguy
Thread Starter
Built B16a
 
Joined: Feb 2005
Posts: 556
Likes: 0
From: liverpool, UK
Default
But dont the itrs have a stock 8700rpm limit?? B18c6 there from btw.

And yes it is making power past that
Reply
0
Old Sep 8, 2007 | 03:09 PM
Share
  #4  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default
fuel cut for itr's is ~8400rpm if im not mistaken. for piece of mind, i'd just get new springs and retainers so you could rev higher safely.
Reply
0
Back to Subforum
Engine Swaps, Tech & Tuning
View Next Unread
CrVtech




Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -8. The time now is 09:50 PM.