im awaiting some more parts for my turbo build...and all i have left to purchase are some fuel system parts. i cant figure out tho, do i need low impedance injectors or the high resistance or watever? i have a 95 civic dx...and a 96 gsr swap. i already have the obd1 clips wired in. i just did that today. i had been running venom obd2 injectors. but since im boosting it, im gonna be gettin 1000cc's..i just need to know which style low impedance or the others. thanks for any help

 

most aftermarket 1000cc injectors are peak and hold (low resistance) and require you wire in a resistor box

 

so, if i got high impedance, i wont have to wire in the box? will they work or do i have to get low resistance?

 

i havent seen any injectors that big that are high impedance

 

well, i saw on HMT where they wired in 10w 10ohm resistors into each of the power wires for the injectors. i did this today. will this work?

 

noboody? i just wanna know if those 10w 10ohm inline resistors will work..i dont trust a used resistor box i dont know anything about

 

come on guys

 

Inline resistors will work fine but they are ugly. It would be much cleaner just to install a resistor box.