Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

no fire

Thread Tools
 
Old Apr 20, 2007 | 01:06 PM
  #1  
cornwall's Avatar
cornwall
Thread Starter
Junior Member
 
Joined: Apr 2007
Posts: 1
Likes: 0
Default no fire

I just bought a 1990 honda civic hatch 1.5 liter. I have replaced the distributer assembly w/coil ,module,rotor,cap,wires,plugs,and battery.the car still will not start .I warrantied 1 distributer assembly thinking that was the problem, but i still have no fire out of my plug wires. i checked voltage at the coil and have 12volts @ both connections.Is that normal?
Reply




All times are GMT -8. The time now is 03:46 AM.