Installing a B16a2 in a 00 civic
Senior Member
Joined: Jan 2005
Posts: 871
Likes: 0
if you have this many questions you should not be doing this yourself, did you try and search to see what answer you came up with, you will need another ecu and maybe conversion harness depending on obd series you got, axles, and mounts, and a tranny
Thread Starter
Junior Member
Joined: Mar 2007
Posts: 7
Likes: 0
i know, i looked everywhere for the answer but i couldnt get anything on a 99-00 ex,sohc vtec. the reseaon i would like to know is should i buy the whole swap or can i get away with what i need,it would save me some money. thank you for you reply
Member
Joined: Aug 2005
Posts: 58
Likes: 0
From: akron
get a b16a2 from a 99-00 si with tranny. get the axles, ecu, shift linkage, radiator hoses, and the motor mounts. You can reuse your EX harness. It will work with the b16a2 sensors. You may have to run a few extra wires, but nothing major.
Last edited by 99siDUDE; Mar 22, 2007 at 07:10 AM.
Senior Member
Joined: Jul 2004
Posts: 901
Likes: 1
From: CA
if you get a complete 99-00 SI B16a2 swap it will bolt in harness and all just make sure you get the A/c and P/s bracket with the swap so your going to need them to bolt your stock compressor and P/s pump on.