dual vale spring ?
Thread Starter
Senior Member
Joined: Aug 2006
Posts: 100
Likes: 0
dual vale spring ?
ok i have a 00 b16 head with no valves springs in it right now.
i know that the intake side comes with dual valves springs but i also have another set of intake dual valve springs can i use them on the exhaust side???
i know that the intake side comes with dual valves springs but i also have another set of intake dual valve springs can i use them on the exhaust side???
Last edited by spoon-eg-; Feb 28, 2007 at 02:51 PM.
Senior Member
Joined: Jun 2005
Posts: 672
Likes: 0
From: Allentown PA, - Phila, PA
Most likely not, since the size of the exhaust valves are smaller than the intake valves...
On permanent hiatus
Joined: Jul 2004
Posts: 9,716
Likes: 0
From: A forum with actual tech
You can swap them, but your valvetrain will still be weakest on the intake side. I would suggest upgrading to at least ITR intake springs and then swap the stock intake side to the exhaust side. I wouldn't bother doing anything otherwise.
