help me with my swap B18C1 INTO EG HATCH
02-19-2007, 11:38 AM
#1
Junior Member
Thread Starter
Join Date: Feb 2007
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
help me with my swap B18C1 INTO EG HATCH
i have a 1992 civic hatch form canada. 1.6L vtec
the gsr b18c1 form a 94 integra, 1.8L vtec
i was wondering about a two wired plug that isnt used ont he engine harness(picture 5 and 6), and a single yellow wire under the manifold. (picture 7 and 8)
my ? is it starts and drives, but idles too fast (3k) and bounces when idleing after warmed up. and that yellow wire my friend wired up it was ripped out.. how do i rewire it wanna amke sure he did it corrcetly,
another friend otld me i woudl have to hard wire a few wires into the computer and engine, what wires woudl they be and can someone help me with diagrams, pinouts, digital photos, anything woudl be greatkly appricriated..
thank you
Shane
the gsr b18c1 form a 94 integra, 1.8L vtec
i was wondering about a two wired plug that isnt used ont he engine harness(picture 5 and 6), and a single yellow wire under the manifold. (picture 7 and 8)
my ? is it starts and drives, but idles too fast (3k) and bounces when idleing after warmed up. and that yellow wire my friend wired up it was ripped out.. how do i rewire it wanna amke sure he did it corrcetly,
another friend otld me i woudl have to hard wire a few wires into the computer and engine, what wires woudl they be and can someone help me with diagrams, pinouts, digital photos, anything woudl be greatkly appricriated..
thank you
Shane
