Swap Complete Car Won't Start Help!!
Thread Starter
Junior Member
Joined: Jan 2007
Posts: 1
Likes: 0
Swap Complete Car Won't Start Help!!
Just swapped a B18A1 into a 98 Civic HX. There is no signal going to the injector. When I use my test light on the injector plug on one wire I get a current when the key is in the ACC position. The other wire which is the common YEL/BLK wire when I touch the test light to it the Fuel Injection fuse blows. When I use the noid light on the injector clips there is no signal going through. Any ideas??
