So koni is a ghood brand?? what is GC/?

 

ground control coilover sleeves with koni yellow shocks. a great setup for the money. check www.weaksauce.org for deals

 

What abou tcambers and lower a arms and stuff.. strut bars all that and should i get integra type are spindals for the 5 lug set up or are tere better conversions?

 

camber kits are needed if you have more than a 2'' drop. control arms are not needed unless you want some bling factor. strut bars and whatnot dont make a noticeable difference. but if you must get one, try to find a 3 point bar like benen, carbing, or passwordjdm.

for the brakes, i would just convert the rears to disks and get better pads and fluid.

 

OEM honda can handle the power????

 

not the pads. that's why you get more aggressive pads and fluid with a higher boiling point. the axles are fine too. unless you like dumping the clutch at 8k during your launches.

 

if you do that you wouldnt go anywhere if you have 350whp