Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

Engine Swap

Thread Tools
 
Old Nov 12, 2006 | 06:33 PM
  #1  
I Drive Imports's Avatar
I Drive Imports
Thread Starter
Junior Member
 
Joined: Nov 2006
Posts: 3
Likes: 0
Default Engine Swap

Hey i got a 95 teg and im tryin to drop a B18-C in it. i can get the engine block and trany for $2800, but how much does it usually cost to get them put in once you have the block?
Reply
Old Nov 12, 2006 | 06:34 PM
  #2  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

instead of a swap, consider doing an lsvtec. or better yet boost it if the engine is healthy.
Reply
Old Nov 12, 2006 | 06:42 PM
  #3  
I Drive Imports's Avatar
I Drive Imports
Thread Starter
Junior Member
 
Joined: Nov 2006
Posts: 3
Likes: 0
Default

my engine has 125,000 miles on it i figure i have 60,000 to come up with money for a new one before i start gettin to the serious problems. and im not to sure how to build an Ls vtec motor i know its an Ls block with a vtec head or somethin never really read up on it sounds expensive though.
Reply
Old Nov 12, 2006 | 06:45 PM
  #4  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

you can build a reliable lsvtec with the $2800 and change you would spend on a swap and install

very informative thread for you to read: http://honda-tech.com/zerothread?id=1676914
Reply
Old Nov 12, 2006 | 06:48 PM
  #5  
TheOtherDave™'s Avatar
TheOtherDave™
Apathy Kills
 
Joined: Nov 2002
Posts: 60,714
Likes: 0
From: The Left Lane
Default

Moved to Engine Swaps.
__________________
:: :ToDspin: - supermod - but who gives a shit?

:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!

Last edited by westcoaststyle; Nov 14, 2006 at 06:23 AM.
Reply




All times are GMT -8. The time now is 10:44 PM.