Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

Anyone know which sending unit for autometer temp gauge?

Thread Tools
 
Old Sep 17, 2006 | 08:12 PM
  #1  
VTEC Mini's Avatar
VTEC Mini
Thread Starter
Junior Member
 
Joined: Aug 2006
Posts: 24
Likes: 0
Default Anyone know which sending unit for autometer temp gauge?

anyone know which sending unit for the Phantom Electrical Temp gauge.. i thought i was overheating this whole time and today i got my hands on one of those lazer pointer temp readers and the hottest point of my cooling system was 190.. and the gauge was reading 245...lol...yeah i forgot that i have to change the sending unit.. it always the easy things.... anyways its for a GSR 96ish..... thanks if anynone had the part #....
Reply
Old Sep 17, 2006 | 08:41 PM
  #2  
Provocateur's Avatar
Provocateur
On permanent hiatus
 
Joined: Jul 2004
Posts: 9,716
Likes: 0
From: A forum with actual tech
Default

Originally Posted by VTEC Mini
anyone know which sending unit for the Phantom Electrical Temp gauge.. i thought i was overheating this whole time and today i got my hands on one of those lazer pointer temp readers and the hottest point of my cooling system was 190.. and the gauge was reading 245...lol...yeah i forgot that i have to change the sending unit.. it always the easy things.... anyways its for a GSR 96ish..... thanks if anynone had the part #....
They should all be the same. I wouldn't trust the readings from an autometer gauge.
Reply
Old Sep 17, 2006 | 08:48 PM
  #3  
VTEC Mini's Avatar
VTEC Mini
Thread Starter
Junior Member
 
Joined: Aug 2006
Posts: 24
Likes: 0
Default

Originally Posted by Däs Schmoo
They should all be the same. I wouldn't trust the readings from an autometer gauge.
ok... didnt know that.... so which one would you trust?
Reply
Old Sep 17, 2006 | 08:58 PM
  #4  
VTEC Mini's Avatar
VTEC Mini
Thread Starter
Junior Member
 
Joined: Aug 2006
Posts: 24
Likes: 0
Default heres a pic of the setup anyways....

heres a pic of the setup....
Attached Images
File Type: jpg
CIMG1346.JPG (167.5 KB, 5 views)
Reply




All times are GMT -8. The time now is 09:53 AM.