Need a harness....
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 296
Likes: 0
From: H-A.net
Need a harness....
I went to h22a.com and they say that they have the H22 and all the stiff. but they say thet it comes with the harness (cut at the wall)
I don't want to have to splice all the wires back together. does anyone know where I can get a FULL harness?
I don't want to have to splice all the wires back together. does anyone know where I can get a FULL harness?
fear the dark side
Joined: May 2002
Posts: 146
Likes: 0
From: Raleigh NC
normally when you do a swap you use the harness from the car you are putting the motor in......
preludes have a 2 piece harness, the part that goes through the fire wall is tied into the dash harness
preludes have a 2 piece harness, the part that goes through the fire wall is tied into the dash harness
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 296
Likes: 0
From: H-A.net
Originally posted by wadzii
normally when you do a swap you use the harness from the car you are putting the motor in......
preludes have a 2 piece harness, the part that goes through the fire wall is tied into the dash harness
normally when you do a swap you use the harness from the car you are putting the motor in......
preludes have a 2 piece harness, the part that goes through the fire wall is tied into the dash harness
HUH??????
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 296
Likes: 0
From: H-A.net
Originally posted by wadzii
you DO NOT NEED A HARNESS..... when you take the motor out of your car put the harness from the STock motor on the h22.
you DO NOT NEED A HARNESS..... when you take the motor out of your car put the harness from the STock motor on the h22.
But then you have to go throught the crap of adding the extra wire and pin for the VTEC in the harnes for the H22 ECU. WHy not just use the harness fron the H22 that already plugs right tinto the H22 ECU?
fear the dark side
Joined: May 2002
Posts: 146
Likes: 0
From: Raleigh NC
the harness that is on the ENGINE does not plug into the ecu. it plugs into the DASH harness. the dash harness goes through the firewall where it plugs into the engine harness at the shock tower.
