B20B swap into B20a3 Prelude
Thread Starter
I'd hit it =P
Joined: May 2006
Posts: 343
Likes: 0
From: District of Columbia
B20B swap into B20a3 Prelude
I have a 1988 Prelude 2.0S 5 speed and want to go with the B20B swap because I really dont want an H22. So my questions are:
1) What do I do about mounts
2) Will my trans bolt up?
3) Can I just find a wrecked CRV and pull everything?
4) It is the twin carb setup so I will need everything concerning the fuel and ECU systems.
Im set on this swap and want to do it. Not looking to do any mods to the stock B20B, just a direct swap with all stock components. I will have about $3000 for such a swap and I really want to keep the car.
Any help is GREATLY appreciated =)
1) What do I do about mounts
2) Will my trans bolt up?
3) Can I just find a wrecked CRV and pull everything?
4) It is the twin carb setup so I will need everything concerning the fuel and ECU systems.
Im set on this swap and want to do it. Not looking to do any mods to the stock B20B, just a direct swap with all stock components. I will have about $3000 for such a swap and I really want to keep the car.
Any help is GREATLY appreciated =)