Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

Question about the '95 Accord

Thread Tools
 
Old Jul 29, 2006 | 07:39 AM
  #1  
Lack O' Dollars's Avatar
Lack O' Dollars
Thread Starter
Junior Member
 
Joined: Jul 2006
Posts: 4
Likes: 0
Default Question about the '95 Accord

PLEASE IGNORE THIS POST -- IT IS NOW POSTED IN THE PROPER SECTION OF THE FORUM ...

I'm a first-timer to this particular forum, but it looks like a great resource right away.

I was wondering if anyone possessing knowledge about '95 Accords might have some thoughts to share about whether or not that particular year/model might be compliant with the OBD-II standard?

Specifically, I'm wondering if anyone has tapped into the interface themselves and/or where the interface connector might be located for this particular vehicle?

I've been asked to drive out to look at a relative's sick '95 Accord, so I'd like to know whether or not I can download codes from the ECM before I go out there. Furthermore, the owners of the vehicle seem to be pretty clueless when it comes to mechanics of any kind, so they've been of little assistance in this regard. I did, however, have them look under the dash on the driver's side and behind the removed ashtray ...

Thanks in advance for any help

Last edited by Lack O' Dollars; Jul 29, 2006 at 08:11 AM. Reason: Accidentally posted in wrong location
Reply




All times are GMT -8. The time now is 01:09 AM.