I was just wondering if anyone has fabricated a downpipe for this style exhaust outlet? i have a 3 bolt flange but the two do not sit flat on eachother making a seat for the gasket. Obvioulsy when volvo put this on their vehicles they had some sort of gasket or a flange that fits this outlet. anyone have ideas? tips? should i just flair a piece of pipe out at the end and make a gasket? **its the turbo on the left**

 

Flange: http://www.atpturbo.com/Merchant2/me...egory_Code=FLS

...or if you wanted to be a baller and opt for a v-band setup, http://www.atpturbo.com/Merchant2/me...egory_Code=FLS

Gasket: http://www.atpturbo.com/Merchant2/me...egory_Code=GSK

Hopefully, that is what you need. It just appears to be a generic internally wastegated T3.

 

oooooooo v-band. i dunno bout that, im trying to do this on a budget. that site is exactly what im looking for.

 

Yeah, I just offered it as an option. It would be nice, but not worth the money on a setup like the one you are planning on running.

 

so even though the outlet is kinda domed it will seal properly?

 

I would assume so. Do you know how the exhaust outlet was sealed on the car it came from?