Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

precision sc61 too big?

Thread Tools
 
Old Feb 28, 2006 | 01:51 PM
  #1  
eg_hatch's Avatar
eg_hatch
Thread Starter
Junior Member
 
Joined: Feb 2006
Posts: 3
Likes: 0
Default precision sc61 too big?

is this turbo too big to go on a stock jdm gsr? will i have too much lag. what turbo would be my best bet and what trim size should i go for?
Reply
Old Feb 28, 2006 | 03:53 PM
  #2  
b16ahybrid's Avatar
b16ahybrid
Senior Member
 
Joined: Dec 2004
Posts: 672
Likes: 0
Default

Originally Posted by eg_hatch
is this turbo too big to go on a stock jdm gsr? will i have too much lag. what turbo would be my best bet and what trim size should i go for?

ugggg.......

How much power are you looking to make?
What kind of tuning are you using?
Reply
Old Feb 28, 2006 | 03:57 PM
  #3  
eg_hatch's Avatar
eg_hatch
Thread Starter
Junior Member
 
Joined: Feb 2006
Posts: 3
Likes: 0
Default

atleast 250 with stock internals
Reply
Old Feb 28, 2006 | 04:35 PM
  #4  
Sharpe's Avatar
Sharpe
Member
 
Joined: Apr 2005
Posts: 72
Likes: 0
Default

check out http://www.homemadeturbo.com they have lots of projects you can read about. this one guy put a t3/t4 on an ls and made like 200 hp. it should kick ass on a gsr
Reply
Old Feb 28, 2006 | 04:52 PM
  #5  
b16ahybrid's Avatar
b16ahybrid
Senior Member
 
Joined: Dec 2004
Posts: 672
Likes: 0
Default

Originally Posted by eg_hatch
atleast 250 with stock internals
sc-61 is overkill unless your looking for peak power....
A t3t4 will get you that kind of power with ease....and then some...
Reply
Old Feb 28, 2006 | 07:17 PM
  #6  
eg_hatch's Avatar
eg_hatch
Thread Starter
Junior Member
 
Joined: Feb 2006
Posts: 3
Likes: 0
Default

if i go with a t3/to4e which size a/r should i go with and trim size? i want something that will pull all the way till redline
Reply




All times are GMT -8. The time now is 11:31 PM.