help please
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 17
Likes: 0
help please
Wondering what the difference is between a LS header and a GSR header.I have a LS top 4to2 but need the 2to1 and their is one on ebay for a GSR,please give me some feedback. thanks
Last edited by colby233; Jan 22, 2006 at 11:11 PM.
Senior Member
Joined: Jan 2003
Posts: 1,994
Likes: 2
GSR header is taller, because the oil pan is deeper. But I don't know whether the extra height is in the 4-2 section or the 2-1 section.
Also, depending on what year, the GSR 2-1 section is shorter because the cat starts farther forward. The GSR O2 sensor is located in the cat's inlet so the pipe doesn't have a bung.
Also, depending on what year, the GSR 2-1 section is shorter because the cat starts farther forward. The GSR O2 sensor is located in the cat's inlet so the pipe doesn't have a bung.
