1988 acura engine swap problem
01-21-2006, 04:18 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
1988 acura engine swap problem
I put an engine from a 88 integra into a 87 integra.I changed intake manifold but Im having problems figuring out how to wire 88 distributor and crank sensor?next to it .87 distributor and coil are seperate but 88 are one unit.I wired it up best I could figure with Haynes wiring diagrams but it doesnt seem to be getting any fire.Any help,Thanks
