What combos work best
#11
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 97civicEXVTEC
I thought you could use either cams?
#12
Junior Member
Thread Starter
Join Date: Jan 2006
Location: I live in Alberta, Canada
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I have been looking for cams and I have heard through a source that Skunk2 is going to be coming out with a set in about a month. In the mean time I have ordered a full Ferrea valvetrain with 1mm oversized valves, and am getting my head port and polished.
#13
Junior Member
Thread Starter
Join Date: Jan 2006
Location: I live in Alberta, Canada
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Däs Schmoo
I don't think you can since the A3 uses a different vtec system than the A2. I could be wrong, but all I found were cams for the A2. Nothing was mentioned about the A3.
Ya I have read at a couple different places that the I-VTECH in the EP3 is different than the Type S. We only have I-VTECH on the intake cam while the type S has it on both. That is why there is such a HP difference between the cars.