Hey gotta another question, just about to bolt the engine into my integra and with the HCP mounts i'm useing it says to "Remove the studs from the H/F series transmission and replace them with 14mm bolts." And i'm thinking to myself, maybe it's just cause i'm new to this, but why can't I use the studs, why do I have to go to the trouble of replacing them with bolts? And if I have to remove them, how do you remove them cause they seem welded onto the tranny. Thanks for any help in advance!

 

they do screw out. get a pipe wrench or vice and start turning....lefty lucy right tighty. i belive just one stud/bolt needs to come out. not all three. line up your mount to the tranny......it shouldnt line up but you will see (if you picture no studs/bolts) that it will line up. hope that helped