Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

Help, integra motor problem

Thread Tools
 
Old Jan 10, 2006 | 08:04 PM
  #1  
EgRocker's Avatar
EgRocker
Thread Starter
brain fart
 
Joined: Sep 2005
Posts: 89
Likes: 0
From: Sacramento ,Nor Cali
Default Help, integra motor problem

i have a problem and non of my friend reallie understand what to do . i was woundering if you guys knoe what's the problems would be. i get about 140 miles off a full tank . my spark plugs turn black after 5 min on idel. it seems to be running rich for some reason . it's a b18b motor in a eg.
Reply
Old Jan 11, 2006 | 05:54 AM
  #2  
mr.crx's Avatar
mr.crx
Senior Member
 
Joined: Mar 2005
Posts: 1,004
Likes: 0
From: phoenix, az
Default

check your 02 sensor
Reply
Old Jan 11, 2006 | 06:16 AM
  #3  
EgRocker's Avatar
EgRocker
Thread Starter
brain fart
 
Joined: Sep 2005
Posts: 89
Likes: 0
From: Sacramento ,Nor Cali
Default

would the check engine light turn on if it was the o2 sensor ? i don't have anycheck engine light .
Reply
Old Jan 11, 2006 | 06:21 AM
  #4  
b16ahybrid's Avatar
b16ahybrid
Senior Member
 
Joined: Dec 2004
Posts: 672
Likes: 0
Default

Not always, what mods are done to your engine?
Reply
Old Jan 11, 2006 | 06:53 AM
  #5  
mr.crx's Avatar
mr.crx
Senior Member
 
Joined: Mar 2005
Posts: 1,004
Likes: 0
From: phoenix, az
Default

ya not always but it can make your check engine light go on. since your check engine light is on that means its throwing a code. on the ecu there is a little hole that will have a little red light flashing out how many times it blinks and tell us if they are fast blinks or slow blinks. then go and find what the code is. there are many places capable of telling you. if you call a honda honda place they will be able to tell you what that code represents.
Reply
Old Jan 16, 2006 | 09:44 PM
  #6  
EgRocker's Avatar
EgRocker
Thread Starter
brain fart
 
Joined: Sep 2005
Posts: 89
Likes: 0
From: Sacramento ,Nor Cali
Default

i just popped in a new o2 sensor. not thing has changed. what else could it be ?
Reply
Old Jan 16, 2006 | 10:43 PM
  #7  
AcuraFanatic's Avatar
AcuraFanatic
Senior Member
 
Joined: Mar 2000
Posts: 37,274
Likes: 0
From: Southern NH
Default

OEM cap rotor/plug wires? What temperature plugs?
Reply
Old Jan 17, 2006 | 02:40 PM
  #8  
EgRocker's Avatar
EgRocker
Thread Starter
brain fart
 
Joined: Sep 2005
Posts: 89
Likes: 0
From: Sacramento ,Nor Cali
Default

these are just nomal spec ngk plugs . i'm been replacing them like crazy eversence this problem started . do u think it could be the map sensor ?
Reply
Old Jan 17, 2006 | 03:38 PM
  #9  
FlatHatchBlack's Avatar
FlatHatchBlack
Junior Member
 
Joined: Aug 2005
Posts: 2
Likes: 0
Default

It could be the map or tps sensor, but check the pressure at the regulator, also, if your fuel return line is clogged it will make your car run rich, but i'm guessing its a faulty regulator.
Reply
Old Jan 18, 2006 | 10:02 AM
  #10  
riskyb's Avatar
riskyb
Junior Member
 
Joined: Jan 2006
Posts: 10
Likes: 0
From: winder ga
Default

check to make sure the little o-ring is still on the map sensor
Reply



All times are GMT -8. The time now is 10:43 PM.