Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

Part fit??

Thread Tools
 
Old Dec 21, 2005 | 06:03 AM
  #1  
B16a2VTIguy's Avatar
B16a2VTIguy
Thread Starter
Built B16a
 
Joined: Feb 2005
Posts: 556
Likes: 0
From: liverpool, UK
Default Part fit??

Is the B series upper engine mount the same for the Integra and the civic EG/EK???
Reply
Old Dec 21, 2005 | 10:24 PM
  #2  
b16ahybrid's Avatar
b16ahybrid
Senior Member
 
Joined: Dec 2004
Posts: 672
Likes: 0
Default

Originally Posted by B16a2VTIguy
Is the B series upper engine mount the same for the Integra and the civic EG/EK???
upper engine mount?????
Which mount?
Reply
Old Dec 22, 2005 | 11:25 PM
  #3  
B16a2VTIguy's Avatar
B16a2VTIguy
Thread Starter
Built B16a
 
Joined: Feb 2005
Posts: 556
Likes: 0
From: liverpool, UK
Default

The one thats on the right of the engine bay at the top, by the power steering resevior.
Reply
Old Dec 23, 2005 | 08:40 PM
  #4  
b16ahybrid's Avatar
b16ahybrid
Senior Member
 
Joined: Dec 2004
Posts: 672
Likes: 0
Default

Originally Posted by B16a2VTIguy
The one thats on the left of the engine bay at the top, by the power steering resevior.
Off the top of my head ther is the rear mount (called the pork chop)...the driver side mount, and the passenger/tranny mount...beyond that you have the passenger side front mount (bolts to the front of the block on the passenger side)..and the a/c mount bracket.....it bolts to the drivers side on the front of the motor.....if thats what your looking for I have that mount if your interested..
Reply
Old Dec 24, 2005 | 03:08 AM
  #5  
B16a2VTIguy's Avatar
B16a2VTIguy
Thread Starter
Built B16a
 
Joined: Feb 2005
Posts: 556
Likes: 0
From: liverpool, UK
Default

its not for me to be honest its for a freind, we havent got aircon in the uk civics, its the passanger side to me, drivers side to you (uk right hand drive)
Its not the tranny mount or the rear mount, its the upper engine mount to the right side of you engine ( if your standing in front of the car looking into the engine bay) just underneith the ABS fuse box and pwr steering pump resevoir.
Reply
Old Dec 24, 2005 | 01:20 PM
  #6  
b16ahybrid's Avatar
b16ahybrid
Senior Member
 
Joined: Dec 2004
Posts: 672
Likes: 0
Default

It bolts to the side of the engine through the timing cover right? If so that mount should be the same..
Reply
Old Dec 27, 2005 | 11:27 PM
  #7  
B16a2VTIguy's Avatar
B16a2VTIguy
Thread Starter
Built B16a
 
Joined: Feb 2005
Posts: 556
Likes: 0
From: liverpool, UK
Default

yeh, cheers thought it was just wanted to confirm coz the company i'm buying uprated ones from (powerflex) only lists them for ITR! thanks
Reply




All times are GMT -8. The time now is 04:50 AM.