power
Nov 15, 2005 | 05:58 AM
Thread Starter
Joined: Oct 2005
Posts: 90
Likes: 0
From: Dont Rob Me
power
how much more HP am i looking at if i install some ITR pistons and CTR cams?
Nov 17, 2005 | 11:28 AM
Joined: Jul 2005
Posts: 2,257
Likes: 0
From: topton,pa
arent ctr pistons better then itr pistons?
Nov 17, 2005 | 04:50 PM
Joined: Aug 2005
Posts: 3,964
Likes: 0
From: Anaheim, CA
i recommed dyno....or get someone with a similar setup who has dyno'd and use that as a reference...i know the skunk stage 2's are about 22hp and the itr's are a couple steps below that
Nov 23, 2005 | 09:13 PM
Joined: Oct 2005
Posts: 22
Likes: 0
From: Grande Prairie
Hehe, My porsche 924 with its stock L4 Turbo puts 175 to the ground
Nov 24, 2005 | 12:57 PM
Joined: Dec 2004
Posts: 672
Likes: 0
Quote:
Originally Posted by TonyKunz
Hehe, My porsche 924 with its stock L4 Turbo puts 175 to the ground
And your proud of that, coming from a porsche?
The stock 924 turbo cranks out about 175hp at the crank...
Nov 26, 2005 | 11:22 PM
Joined: Oct 2004
Posts: 46
Likes: 0
i made about 200whp with JDM ITR pistons, Skunk2 Stage 1 cams, and stock ITR head... You should be atleast 180whp...
Nov 29, 2005 | 07:15 AM
Thread Starter
Joined: Oct 2005
Posts: 90
Likes: 0
From: Dont Rob Me
well see, at the moment, i hace ITR pistons and Blox cams. I'll dyno and post up numbers.
Nov 29, 2005 | 07:50 AM
Joined: Sep 2005
Posts: 89
Likes: 0
From: Sacramento ,Nor Cali
Quote:
Originally Posted by 97civicEXVTEC
arent ctr pistons better then itr pistons?
yup they are better. they have a higher compression ratio as well . itr would just make your car much slower.
