Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

engine problem

Old Sep 6, 2005 | 01:42 PM
  #1  
92b18hatch's Avatar
92b18hatch
Thread Starter
Senior Member
 
Joined: Aug 2005
Posts: 100
Likes: 0
From: milwaukee wisconsin
Default engine problem

after i drive my car and get it all warmed up then shut the car off, when i press the gas it will cut out on me for a second and then come back. i had good fuel pressure when i checked. i tryed a new fuel pump relay and that didnt work. help!?
Reply
Old Sep 7, 2005 | 05:32 AM
  #2  
psx_pat's Avatar
psx_pat
Senior Member
 
Joined: Mar 2005
Posts: 164
Likes: 0
Default

Did you pressed it Wide Open Throttle all the way very quick? Or you just tap the gas very quick (tap about 25% throttle and then release it very quick)?
Reply
Old Sep 7, 2005 | 01:31 PM
  #3  
92b18hatch's Avatar
92b18hatch
Thread Starter
Senior Member
 
Joined: Aug 2005
Posts: 100
Likes: 0
From: milwaukee wisconsin
Default

i mean after driving the car i can be driving at 40mph and it will just cut out on me for a second and then come back without me moving my foot. for some reason it doesnt to do if it sits and the car cools down, it only happens when the car is warm.
Reply
Old Sep 7, 2005 | 04:40 PM
  #4  
IntegraType-R's Avatar
IntegraType-R
ALL MOTOR KING
 
Joined: Aug 2004
Posts: 369
Likes: 0
Default

igition.. check your igition.
Reply
Old Sep 7, 2005 | 04:41 PM
  #5  
IntegraType-R's Avatar
IntegraType-R
ALL MOTOR KING
 
Joined: Aug 2004
Posts: 369
Likes: 0
Default

igition.. check your igition...depending on the motor i'd suggest replacing the whole dizzy setup but check your coil, igintor and coil module to make sure their working properly alot of times of that coil/module get too hot they dont work right if their old.
Reply
Old Sep 7, 2005 | 05:24 PM
  #6  
92b18hatch's Avatar
92b18hatch
Thread Starter
Senior Member
 
Joined: Aug 2005
Posts: 100
Likes: 0
From: milwaukee wisconsin
Default

sounds good, ill tell you what happens
Reply



All times are GMT -8. The time now is 02:36 AM.