I think I remember you doing this. GSR rear brake swap onto a 92-95 civic chassis.

What are all the parts I require for switching from rear drums to rear GSR discs?

Also, will a Comptech rear sway\lower tie bar combo for a 94- Integra work on a 92-95 civic chassis?(given that I have integra rear LCAs)

Thanks in advance.

 

LCAs, trailing arms, hubs, brake setup, and ebrake cable.

And the comptech sway bar will fit.

 

Thanks, thats all I needed to know.

 

Technically, all you really need is the trailing arm itself (the huge ass piece everything bolts to) and the complete brake assembly, including the hub, rotor, caliper, e-brake cable and rubber line (or stainless replacement). The LCA is a good idea from a GS-R as it has the mounting point for a rear sway bar, but it is not nessicary, you can re-use your stock one. If your going to use the Comptech unit, you will most likely need them anyway. That also should bolt up, but I've never tried so I can't say for sure. Seeya.