Engine swap ITR B18C6 in to Civic B16a2 EK4
Thread Starter
Registered User
Joined: Aug 2005
Posts: 6
Likes: 0
Engine swap ITR B18C6 in to Civic B16a2 EK4
Hi
Can any body help, can i use my b16a2 wiring harness for the b18c6 or will i have plugs spare, and are the drive shafts the same, my car 2000 civic vti (euro), think its called Civic Si in USA same car.
Thanks
Can any body help, can i use my b16a2 wiring harness for the b18c6 or will i have plugs spare, and are the drive shafts the same, my car 2000 civic vti (euro), think its called Civic Si in USA same car.
Thanks
Thread Starter
Registered User
Joined: Aug 2005
Posts: 6
Likes: 0
Originally Posted by teg92
the drive shafts should work from the b16 and you should be able to use your b16a2 wiring harness as long as both cars are the same OBD's
thanks
WHAT OK YEAH!
Joined: Sep 2003
Posts: 5,565
Likes: 0
From: overthere
Originally Posted by CivicVti
My car is obd2b the teg the engine come from is obd2a, i think the wiring is the same, can you confirm.
thanks
thanks
Senior Member
Joined: Feb 2005
Posts: 133
Likes: 0
could you just run a conversion and chip an ecu to run it that way...although I dont know what the rules/regs are in terms of emissions in the UK. I just figured you could obd1 it and run a chiped ecu with appropriate tuning.
Thread Starter
Registered User
Joined: Aug 2005
Posts: 6
Likes: 0
Originally Posted by teg92
the connectors at the ECU are different a OBD2a harness will not plug into a OBD2b ecu and vise versa
Originally Posted by teg92
the drive shafts should work from the b16 and you should be able to use your b16a2 wiring harness as long as both cars are the same OBD's
thanks
