LS/Vtec Timing Belt
#1
Senior Member
Thread Starter
Join Date: Jun 2004
Location: Maryland
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
LS/Vtec Timing Belt
OK kinda confused with is i need a new timing belt and Gaskets but for the applications for the timing belt i dont no what to choose i have B18a bottom block with a 95 gsr head now what kinda timing belt application should i get. b18 oem timing belt or b18c oem timing belt.
ALso i need new top end head gaskets should i get the b18a oem gaskets or b18c1 oem top end gaskets but the thing is are the Cylinder bores the same for a LS/GSR which is 81mm. sorry for the dumb questions i would like some answers thanks.
ALso i need new top end head gaskets should i get the b18a oem gaskets or b18c1 oem top end gaskets but the thing is are the Cylinder bores the same for a LS/GSR which is 81mm. sorry for the dumb questions i would like some answers thanks.
#3
^ Visual Learner
Join Date: Jun 2004
Location: Maryland
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
i've read a lot about this. so far my setup is a b18a block with a b16 head. all the forums say use itr or gsr timing belt, water pump, and oil pump. will a b16 oil pump, water pump and timing belt work with my block and my setup?
#4
been there done that
Originally Posted by g2_teg_na
i've read a lot about this. so far my setup is a b18a block with a b16 head. all the forums say use itr or gsr timing belt, water pump, and oil pump. will a b16 oil pump, water pump and timing belt work with my block and my setup?