I am swapping a 93 honda integra b16a w/ auto trans into a 93 honda civic dx w/ auto trans....can anyone help with wiring diagram crossovers.. example pinout diagram from d series ecu to b series ecu and d engine harness to b engine harness.. I am in mid process of swap I am dropping motor back in today.... Also what linkage do i use will the d series work or will i need a auto linkage from a 94-01 integra?


Thanks, in advance
Steve

Please help any suggestions will be great thanks

 

bump

 

wait what? INTEGRA B16???? what???

 

Oh boy ok here is the deal I don't know if it was 1990 but I know 92-93 in Japan the motor that came in the honda integra xsi was a b16a with a pr3 ecu.... I am looking for a diagram to cross over the original in my civic to the new harness on my b16

 

You might have troubles with the tranny being cable and not hydro.

Wiring wise it'll be just like any other b series obd1 auto swap

 

Should be the same.. and i'm hoping you have a XSI integra, if not your talking about a b17a.. which is a godly motor i'd hold on to that thing, but to be personally honest, i didn't think they made any b series motors(b16a,b17,b18c1-6) in auto matic

 

it is an auto trans is this still going to be a problem...and because the harness is cut i have to hard wire everything.

 

ok now i am in serious shit i tried to drop the motor in my civic and it seems as if be 93 honda teg motor is about 1" wider for the mount line up.... I have the drivers side mount in and bolted but i can't seem to get the passengers lined up. any body who has installed this motor noticed this before... I really feel dumb know cause everytime i ask a question about a b swap i get the same reply... "ALL B SERIES MOTORS ARE THE SAME" i guess not

some one please help me out here

 

you are using the b series mounts? Where did you get your engine from?

 

yes i am using b series mounts i bought them brand new from an acura dealer...... I bought the motor from a supposed repuatable jdm dealer in washington....they said it would bolt right in... the wiring how every is a HUGE pain in the ass I have to hard wire everything.... hence the asking about wiring diagrams

thanks,
Steve