Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

GSR Tranny problems

Thread Tools
 
Old Mar 28, 2005 | 04:19 PM
  #1  
ACE4DOOR's Avatar
ACE4DOOR
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 10
Likes: 0
Default GSR Tranny problems

Does anyone know another website besides gearspeed to get tranny parts from, because my GSR tranny rarely but sometimes pops outa second. I asked them how much for the syncros for that gear, but they only sell them as a set. Also give me some suggestions on what could be the problem. Do keep in mind that the rod that connects to the shiftlinkage is bent, from lowering the car onto the shift linkage when doing my swap, so I can't go in reverse or downshift into second either.
Reply
Old Mar 28, 2005 | 04:30 PM
  #2  
Kai's Avatar
Kai
Rotorphile.
 
Joined: Mar 2002
Posts: 10,120
Likes: 0
From: Richmond, VA
Default

If the linkage is bent, common sense would tell you to replace that first.
Reply
Old Mar 28, 2005 | 04:35 PM
  #3  
ACE4DOOR's Avatar
ACE4DOOR
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 10
Likes: 0
Default

Originally Posted by Kai
If the linkage is bent, common sense would tell you to replace that first.
I already did that. That's why I ain't say nothing about the linkage.
Reply
Old Mar 28, 2005 | 06:28 PM
  #4  
ACE4DOOR's Avatar
ACE4DOOR
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 10
Likes: 0
Default

anyone
Reply
Old Mar 28, 2005 | 07:15 PM
  #5  
ACE4DOOR's Avatar
ACE4DOOR
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 10
Likes: 0
Default

Bump
Reply
Old Mar 28, 2005 | 07:17 PM
  #6  
sp00nfKeD's Avatar
sp00nfKeD
Registered User
 
Joined: Mar 2005
Posts: 9
Likes: 0
Default

u might want to dump sum synchro mesh tranny oil in ur tranny , might help
Reply
Old Mar 28, 2005 | 07:28 PM
  #7  
ACE4DOOR's Avatar
ACE4DOOR
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 10
Likes: 0
Default

Originally Posted by sp00nfKeD
u might want to dump sum synchro mesh tranny oil in ur tranny , might help
Na man, that tranny needs to be cracked open. A local tuner/builder that is my friend, drove my car and even he says that the gear selector or rod that connects the linkage is bent or twisted due to what I told him(dropping car on the linkage when doing a swap) To go from 3rd to 4rth, I have to shift towards reverse. If I go straight back it will go into 2nd and possibly blow my engine. I can't find reverse, and 2nd just started poping out not long ago rarely but sometimes, usually when I hit a bump or my car bucks back and 4rth.
Reply
Old Mar 29, 2005 | 07:46 AM
  #8  
sp00nfKeD's Avatar
sp00nfKeD
Registered User
 
Joined: Mar 2005
Posts: 9
Likes: 0
Default

o
Reply
Old Mar 29, 2005 | 09:51 AM
  #9  
ACE4DOOR's Avatar
ACE4DOOR
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 10
Likes: 0
Default

No suggestions?
Reply
Old Mar 29, 2005 | 11:54 AM
  #10  
b16ahybrid's Avatar
b16ahybrid
Senior Member
 
Joined: Dec 2004
Posts: 672
Likes: 0
Default

Originally Posted by ACE4DOOR
No suggestions?

Yeah read two posts up, right next to your screen name, you answered your own question.
Reply



All times are GMT -8. The time now is 06:16 AM.