Help!!!!
Thread Starter
Senior Member
Joined: Feb 2005
Posts: 123
Likes: 0
From: Fla USA
Help!!!!
I just threw a b16 in my civic and my ecu has 3 plugs and i only have 2 on my wiring harness do i utilize the third or is just on open spot??? Also my tach or speedo doesnt work but my engine temp and fuel works all that stuff was all good before the swap......ANY SUGGESTIONS.....Best computer for my setup???? thanks peeps!
Still here... sorta...
Joined: Sep 2000
Posts: 17,177
Likes: 2
From: CO
I have a suggestion: post in the correct section. :goodjob:
As for what you need, you have an OBD1 car and an OBD2 computer. You need to get a P30 from what it sounds like.
As for what you need, you have an OBD1 car and an OBD2 computer. You need to get a P30 from what it sounds like.
Last edited by westcoaststyle; Mar 19, 2005 at 08:19 PM.
