Hey guys, I have a 96 B18C on the way, and it's going into a 97 Civic EX, (canadian version - no Vtec). can I use the complete GSR harness since it's OBD2, and so is my system? or do I still need to cut it up and reuse my harness... thanks guys.

Mark

 

The GSR harness is a 2 piece harness and your car is a 1 piece harness so you CANT use the GSR harness your going to have to use yours and run the vtec wires this
web-site helped me out alot
http://www.ff-squad.com/tech/wiring/wiring.96-98.jpg

 

thatnks, I appreciate it. I thought there was a jumper harness I could use so that I could use the factory GSR harness, and hook that into my ECU; is this correct? if not, thatnks for the link.

Mark

 

i know they make OBD converion harness but the GSR is OBD2 and your car is OBD2 so you dont need one I could me wroung though

 

thats what I thought, thanks.

Mark