Forced Induction Reading Material
Thread Starter
Camaro Handler
Joined: Aug 2004
Posts: 17
Likes: 0
From: CA
Forced Induction Reading Material
hey guys. I frequently read these boards but don't post much.
I was wondering if anyone out there knew any good books on forced induction, turbocharging in particular.
I recently bought a couple turbos from a Nissan (300z I think.. not sure. No model numbers on the turbos yet) and I'm thinking about running a TT setup on my IROC. It's listed in my sig. Expected boost will be around 14 PSI or so. And yes the motor was rebuilt with boost in mind, with a strong rotating assembly and a nice 8.4:1 CR.
Okay, cheers!
- Dave.
I was wondering if anyone out there knew any good books on forced induction, turbocharging in particular.
I recently bought a couple turbos from a Nissan (300z I think.. not sure. No model numbers on the turbos yet) and I'm thinking about running a TT setup on my IROC. It's listed in my sig. Expected boost will be around 14 PSI or so. And yes the motor was rebuilt with boost in mind, with a strong rotating assembly and a nice 8.4:1 CR.
Okay, cheers!
- Dave.
been there done that
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Thread Starter
Camaro Handler
Joined: Aug 2004
Posts: 17
Likes: 0
From: CA
Originally Posted by DRfrank
you mean a 300zx? twin turbo car of the early 90's that was suposed to compete witht he supra... where are you gunna put those big boys??
That might be it. And there is plenty of room in an 88 Camaro's engine bay for them with a little creativity. Do you know any model numbers from those turbos, or where to find them? Do you know what psi they ran at stock?
And thanks for the link to the books too! I totally forgot about amazon!
how does one "forget about amazon" ?? 
Moderator
Joined: Jun 2001
Posts: 11,776
Likes: 0