which head
#21
yes the GSR head will make .2 more compression on a motor than a ITR/B16A head. ITR has a higher dome piston than the GSR that is why it has more compression but put a GSR head on a ITR block you will have closer to 11:1 compression
and no that isn't very impressive for high boost....I know of street tire cars on low boost running that.
and no that isn't very impressive for high boost....I know of street tire cars on low boost running that.
#23
Originally Posted by BoostedITR41
yes the GSR head will make .2 more compression on a motor than a ITR/B16A head. ITR has a higher dome piston than the GSR that is why it has more compression but put a GSR head on a ITR block you will have closer to 11:1 compression
and no that isn't very impressive for high boost....I know of street tire cars on low boost running that.
and no that isn't very impressive for high boost....I know of street tire cars on low boost running that.
#24
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BoostedITR41
yes the GSR head will make .2 more compression on a motor than a ITR/B16A head.
#25
I missed Sean
Thread Starter
Join Date: Aug 2004
Location: Fairfield/Bridgeport CT
Posts: 11,285
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Shmoo
Umm...I believe I said that in an earlier post. :fawk:
so then it will, i'm jsut going to go with the GSR Swap then and hpefully i can find an LS tranny too (i heard it is geared slightly better or suttin?)
#26
Originally Posted by DRfrank
you little wiseass... lol
so then it will, i'm jsut going to go with the GSR Swap then and hpefully i can find an LS tranny too (i heard it is geared slightly better or suttin?)
so then it will, i'm jsut going to go with the GSR Swap then and hpefully i can find an LS tranny too (i heard it is geared slightly better or suttin?)
no LS tranny is better for big turbos cause of longer gears....all motor you are goin to want a ITR or B16A tranny