HELP!!!! Problem with injection/ignition when the horn is used
Thread Starter
Registered User
Joined: Oct 2004
Posts: 1
Likes: 0
HELP!!!! Problem with injection/ignition when the horn is used
Everytime I use the horn, the ignition light lights on, and the low-throtle jumps to 2000rpm (900 normal), and the cut off get set to 4000rpms (8200 normal). it´s a B16A2 Engine.
Then I need to turn the car off, than on again to get the igntion reseted.
CAN ANYONE HELP ME PLEASE?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!
Then I need to turn the car off, than on again to get the igntion reseted.
CAN ANYONE HELP ME PLEASE?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!
On permanent hiatus
Joined: Jul 2004
Posts: 9,716
Likes: 0
From: A forum with actual tech
Sounds like a short in the system. Use a factory service manual to locate the wires associated with the horn and ignition. Test those to determine the short.
Or don't use the horn.
Or don't use the horn.