CVT transmissoin draining.
jack your car up and support it on jack stands. the Drain plug is on the passenger side on the lowest part of the tranny. It's a plug that a 3/8 ratchet can fit into. loosen it and drain the CVT fluid. Remember you will need about 4 quarts of Honda CVT Fluid, NOT ATF. torque the drain bolt to 36 ft/lbs. lower your car and fill through the tranny dip stick. Start engine, move selector through all positions 3 times, ensuring each gear engages. put gear into park and turn off engine. check fluid to see if it's up to the upper mark. Done


