Turbo Vacum Lines
08-31-2004, 07:18 PM
#1
Boost is like crack
Thread Starter
Join Date: Mar 2004
Location: OP KS
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Vacum Lines
Is there a site or article on the net that has a good refence towards routing vacum lines for a turbo charged b16a? Its an obo 0 car. Any help is appericated!
Thanks
Thanks
08-31-2004, 08:09 PM
#2
Still here... sorta...
Depends on the turbo, really. Some turbos have a vacuum line that needs to connect to the compressor housing, others don't. It also depends on what type of wastegate (internal/external) is being used as well as if a manual or electronic or no boost controller is installed. Could also vary depending on whether or not a boost gauge is being used. Additionally, whether the setup uses a BOV will make an effect.
Do you have a picture or more detailed information about your setup that would allow me to further contribute to the information you need?
hih
Do you have a picture or more detailed information about your setup that would allow me to further contribute to the information you need?
hih