Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

what tranny for B20B in 94 Integra?

Old Jul 30, 2004 | 02:05 PM
  #1  
huge230's Avatar
huge230
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 66
Likes: 0
Default what tranny for B20B in 94 Integra?

Hey gusy Im thinking of doign a B20B VTEC swao into my 94 integra because of the price of B20s. What kind of tranny will i need? Some engines come with a tranny but obviously that is no good since it is 4wd. Will a ls or gsr tranny work? Thanks P.S. will the b20 bolt right in my car?
Reply
Old Jul 30, 2004 | 03:12 PM
  #2  
york2600's Avatar
york2600
Registered User
 
Joined: Mar 2003
Posts: 41
Likes: 0
From: Napa, CA, USA
Default

Any B series tranny. Just keep your Integra tranny.
Reply
Old Jul 30, 2004 | 05:23 PM
  #3  
kenton's Avatar
kenton
Change sig? Lose [quote]!
 
Joined: Jan 2004
Posts: 1,414
Likes: 0
From: Little Rock, AR
Default

How much power do you think you'll make?
Reply
Old Jul 30, 2004 | 05:33 PM
  #4  
huge230's Avatar
huge230
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 66
Likes: 0
Default power

I was thinking of around 250 whp
Reply
Old Jul 30, 2004 | 05:45 PM
  #5  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

Originally Posted by huge230
I was thinking of around 250 whp
all motor? that is very difficult.
Reply
Old Jul 31, 2004 | 06:54 AM
  #6  
huge230's Avatar
huge230
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 66
Likes: 0
Default turbo

I was thinking of a turbo. What kind of boost can stock internals take?
Reply
Old Aug 1, 2004 | 02:44 PM
  #7  
kenton's Avatar
kenton
Change sig? Lose [quote]!
 
Joined: Jan 2004
Posts: 1,414
Likes: 0
From: Little Rock, AR
Default

Depending on tons of things, unmanaged or poorly managed, 4-8psi. Tuned as much as 10, but. . . it would take a great tuner to get those numbers.
Reply
Old Aug 1, 2004 | 09:51 PM
  #8  
Civic2Scooby's Avatar
Civic2Scooby
 
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
Default

I would go with an ITR or SIR tranny.
Reply
Old Aug 2, 2004 | 08:36 PM
  #9  
95tegRS's Avatar
95tegRS
Senior Member
 
Joined: Nov 2002
Posts: 276
Likes: 0
Default

Any B-series traanny will work, but since u gota 94 teg, make sure you pick up a Hydrolic B-series. retrofitting a cable tranny is very expensive and time consuming!!, your best bet would be a B16a tranny from civic si 99-01. the ratio's are the same as a ITR, except the Si's dont have a LSD. Only down side is that you'll loose top end, and hiway fuel economy
Reply
Old Aug 19, 2004 | 09:36 PM
  #10  
WhatNow's Avatar
WhatNow
n00b
 
Joined: Aug 2004
Posts: 68
Likes: 0
Default

Originally Posted by huge230
Hey gusy Im thinking of doign a B20B VTEC swao into my 94 integra because of the price of B20s. What kind of tranny will i need? Some engines come with a tranny but obviously that is no good since it is 4wd. Will a ls or gsr tranny work? Thanks P.S. will the b20 bolt right in my car?
well considering that all b20 trannies ar automatic's i would think thats another reason you'd need a tranny... yea you could basicly use any b serries tranny but be careful before making your selection.. yes gsr or type r would be good, especially for all motor applications.. but if you're gonna go boost.. you might wanna consider the good ol cable tranny from a b16...
Reply


All times are GMT -8. The time now is 08:22 AM.